manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 51 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 51

Provisioning Server configuration

A file server is an HTTP or an HTTPS server that is required to download and save the software
distribution package and the settings file.

When the phone is connected to the Ethernet for the first time or during a restart, the phone
checks for software updates and settings files on the specified file servers.

You can provide the file server addresses to phones through one of the following methods:

• DHCP

• LLDP

• Device Enrollment Services (DES)

• The web interface of the phone

Configuration through DHCP

Avaya J100 Series IP Phones connect to the DHCP server during the boot up. You can configure

the DHCP server to provide the following information to the device:

• IP address
• Subnet mask
• IP address of the router
• IP address of the SNTP server
• IP address of DNS

You can configure the DHCP server to:

• Dynamically assign IP addresses to the Avaya J100 Series IP Phones.
• Provide various configuration parameters to the Avaya J100 Series IP Phones by configuring

SSON (site-specific option) in the DHCP server.

Setting up a DHCP server

About this task

Use this procedure to set up a third-party DHCP server.

Before you begin

Contact your server software vendor to obtain server software installation and configuration

instructions.

Provisioning Server configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

51

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов