Avaya J100 Series Скачать руководство пользователя страница 36

Страница: 36 / 528

• File named

release.xml

that is used by the Avaya Software Update Manager application.

Avaya Software Update Manager upgrades and maintains firmware for Avaya managed

devices.

Note:

You can configure Open SIP root certificates by using the TRUSTCERTS parameter in the

46xxsettings.txt

file. The supported file format is

.pem

Modifying the settings file

About this task

Use this procedure to modify the

46xxsettings.txt

file to provision the phone configuration

parameters. The parameter values stored for the users of a particular phone model do not apply to

other phone models, even if the corresponding SIP user is the same.

Procedure

1. On the file server, go to the directory of the

46xxsettings.txt

file.

2. Open the

46xxsettings.txt

file in a text editor.

3. Set the values of the parameters that you want to provision.

4. Save the

46xxsettings.txt

file.

Result

On the next poll, the phones download the

46xxsettings.txt

file and apply the configuration

settings.

Installation checklist

Use this checklist to gather, record, and verify the information during the installation.

No.

Task

Reference

Check the prerequisites.

Administer VLAN.

Configure the servers.

Provisioning server
configuration

on page 30

Download and save the software package.

Downloading and saving the
software

on page 35

Configure the Settings file.

Configuration parameters

page 292

Configure the Upgrade file.

Device upgrade process

page 286

Install the phone.

Installing the phone

on page 37

Initial setup and connectivity

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 36 / 528

Результаты поиска

Содержание J100 Series

Отзывы: