manualshive.com logo in svg

Avaya J100 Series, Установка и администрирование, Страница: 197 / 528

Поделиться
Скачать
Avaya J100 Series Скачать руководство пользователя страница 197

To enable the phone to auto-answer the incoming call, ensure to enable the

AUTO_ANSWER_DURING_CALL parameter, and disable the AUTO_ANSWER_MUTE_ENABLE

parameter.

For more information on configuring the soft client, see 

https://supportcenter.broadsoft.com/

Limitations

For using the soft client for the remote call initiation, ensure that you do not activate the local Call

Forward always and DND features.

BroadSoft Xsi support

The BroadSoft Xtended Service Interface (Xsi) provides a set of APIs that enables telephony

applications to integrate with BroadSoft servers to perform telephony-related functions in a

BroadSoft communication network. Avaya J100 Series IP Phones deployed in a BroadSoft

communication environment support BroadSoft Xsi.

Avaya J100 Series IP Phones use the Xsi interface to support the following Broadworks features:

• Directory
• Simultaneous Ring Personal
• Call Park/Unpark
• Call Forward Always
• Call Forward Busy
• Call Forward No Answer
• Do Not Disturb
• Call Waiting
• Anywhere
• Mobility

Note:

If you configure BroadSoft Xsi, the following local features will not be available for the users.

The administrator must enable these features on the BroadSoft server.

• Do Not Disturb
• Call Forward

BroadSoft Xtended Service Interface (Xsi) configuration

Use 

46xxsettings.txt

 file to set the following parameters:

Feature configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

197

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов