Avaya J100 Series Скачать руководство пользователя страница 152 | Manualshive

Страница: 152 / 528

Avaya J100 Series Скачать руководство пользователя страница 152

• Firmware

• Backup/Restore User Data

• Updates

4. Click one of the following:

•

Save

: To save the configuration changes.

•

Reset to Default

: To revert to the default values.

Management settings field descriptions

Name

Description

Device Enrollment Service

DES Discovery

Specifies the DES Discovery mode.

The options are:

•

Enable (default)

•

Disable

•

Disable and Restored with Reset to Default

Embedded Public Certificates

Specifies whether to trust the embedded public
certificates.

The options are:

•

Trusted only if Trustcerts is empty (default)

•

Always Trusted

HTTP Provisioning Server

HTTP Server Address

Specifies the IP address of the provisioning file
server.

The valid value is the IP address in the dotted
decimal name format, DNS name format, or colon-
hex.

The default value is 0.0.0.0.

HTTP Server Directory Path

Specifies the path to the configurations and data
files in HTTP and HTTPS GET operations during
device bootup. This path is relative to the root of the
HTTPS file server, to the directory in which the
device configuration and date files are stored. If
$MACADDR and/or $MODEL4 and/or $SERIALNO
macro is present in the configured path then such
macro is replaced with its actual value.

The valid value is a string of up to 127 ASCII
characters without spaces. This field is empty by
default.

Table continues…

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

152

Comments on this document? [email protected]

«
...
150
151
152
153
154
...
»

Содержание J100 Series

















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов