Avaya J100 Series Скачать руководство пользователя страница 116

Страница: 116 / 528

Name

Description

Password

Specifies the password for the Authentication identity.

The valid value is a string of 8 to 63 characters for WPA/
WPA2PSK and of 1 to 32 characters for 802.1x EAP. The
default value is blank.

Value format: alphanumeric characters and special symbols.

Note:

The space character (ASCII 0x20) is not supported.

Authentication Anonymous Identity

Specifies the Authentication identity.

The valid value is a string of up to 32 alphanumeric characters
and special symbols. The default value is blank.

Note:

The space character (ASCII 0x20) is not supported.

QoS

Audio Priority (Layer 2)

Specifies the Layer 2 priority value for RTP and RTCP audio
streams.

The options are from 0 to 7. The default value is 6.

Signaling Priority (Layer 2)

Specifies the Layer 2 priority value for signaling protocol
messages.

The options are from 0 to 7. The default value is 3.

Audio DiffServ (Layer 3)

Specifies the layer 3 Differentiated Services (DiffServ) code
point for audio frames generated by the phone.

The valid value is an integer from 0 to 63. The default value is
46.

Signaling DiffServ (Layer 3)

Specifies the layer 3 Differentiated Services (DiffServ) code
point for signaling frames generated by the phone.

The valid value is an integer from 0 to 63. The default value is
34.

Configuring SIP settings

About this task

When you click on any configuration field, the screen displays the details of that field in the

Parameter Help section.

Procedure

1. Log in to the web interface as an administrator.

2. In the navigation pane, click

SIP

Phone configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

116

Comments on this document? [email protected]

Содержание J100 Series

















































































































































































































































































































































































































































































































































Результаты поиска

Содержание J100 Series

Отзывы:

Avaya J100 Series, Установка и администрирование, Страница: 116 / 528

Результаты поиска

Содержание J100 Series

Отзывы: