Avaya INDeX CSLC, Руководство по установке, Страница: 19 / 28

Switching Between Systems Page 19
Switching Between Systems
If the phone has been subscribed to several systems, you must select which system
to currently use. For multi-site working (requires INDeX net) the user must log into
each site and the 20DT must be set to AUTO
1. On your 20DT, press MENU and then > until LOGIN appears, then press
2. SELECT LOGIN appears, press
3. Press > until required SYSTEM number (1-4) appears
4. With the required SYSTEM number displayed, press . Your handset bleeps
and SELECT LOGIN appears .
Either, press MENU to exit, or , for multi-site working, press
5. For multi-site working, you must visit each site and allocate a discrete system
number to it. E.g. for site 1, allocate SYSTEM 1 and for site 2, allocate SYSTEM
2 , etc. See page 21 for instructions on programming the INDeX for Multi-site
Roaming
6. Where multi-site working is required, press > until required AUTO appears and
press . (You only need to do this once at any site but you must log on at each
site – repeating steps 1 to 5 at each site for each handset)
7. Your handset bleeps and SELECT LOGIN is displayed
8. Press MENU to exit.
Removing a Subscription
If necessary, you can remove a subscription from the handset.
Do not do this lightly as you may not be able to re-subscribe without assistance
from your System Maintainer
To remove a handset's subscription :
1. On your 20DT, press MENU and then > until LOGIN appears, then press
✓
2. SELECT LOGIN appears
3. Press > until required SUBSCRIPTION REMOVE appears, then press
✓
4. Enter your password and press
✓
5. Press
✓
and enter your passcode.
✓
6. SUBSCRIPTION REMOVE appears, press
✓
and then press > until the system
you wish to remove appears
7. Press
✓
again to remove the system
If the system removed was the one currently in use, you need to LOGIN to
another system ( see "Subscribing Handsets" on page 18 )
8. Press MENU to finish
Installation Manual Page 19
INDeX CSLC 38DHB0002UKCA – Issue 8 (26/03/2002)