Avaya INDeX CSLC Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

Avaya INDeX CSLC Скачать руководство пользователя страница 16

Page 16 - Installation

Installing DECT Base Stations (DBS)

Mounting the Base Station

Each Base Station is supplied with 1.5mtrs of cable for connection to the slave jack

socket (see page 3).
To mount a Base Station, perform the following:
1. Check the proposed position of the Base Station and ensure that there is a

minimum of 200mm's clearance on all sides of the Base Station

2. Use the Base Station Wall Mounting Bracket (see figure below) as a template to

mark the required holes.

Ensure that the Base Station is level. Drill and insert

the wall fixings for the No. 6 round-head screws.

3. Run the Base Station line cord through the access hole before fixing the bracket

to the wall with the two No. 6 round head screws

4. Push the Base Station line cord into it's socket on the Base Station

5. Slide the Base Station onto the mounting bracket (a firm push is required to slide

the Base Station lugs over the pins on the wall mounting bracket)

Wall mounting

securing screw slots

Base Station line
cord entry point

Top – viewed from front

6. Connect the base station line cord from the base station to the slave jack socket

provided for the base station

Note:

For country variants, use the following table:

Socket Type

Pins

LJU 2/3A

RJ45

RJ11

3 & 4

4 & 5

3 & 4

7. Connect, using twisted pair cable, the slave jack socket to the MDF (see page

Configuring the Base Stations

For the system to function correctly, it must measure the cable delay on signals to

and from each Base Station. Note that whilst this process is being performed the

system cannot handle calls. See

"Base Station Cable Measurement" on page 17

Page 16

Installation Manual

38DHB0002UKCA – Issue 8 (26/03/2002)

INDeX CSLC

«
...
14
15
16
17
18
...
»

Содержание INDeX CSLC





























Отзывы:

Нет отзывов