Page 12 - Subscribing
Page 12 - Introduction
INDeX DECT 20DT Handset User's Guide
Subscribing
38DHB0002UKCW – Issue 7 (10/03)
Subscribing
Introduction
For DECT handsets to be connected to a DECT system they have to go through a process
called ‘subscription’.
Logging On:
The 20DT can subscribe to any one of four DECT systems. However, although the 20DT
can subscribe to up to four systems, it can only be logged onto one of those systems at any
one time.
Multi Site Roaming
A 20DT can, across up to four sites linked by INDeX net, be used by the same user.
Hence, when moving between sites the 20DT user will be automatically able to
make/receive calls and use all of the 20DT functions. To activate this facility the following
actions are required:
•
At each INDeX site, the 20DT must be allocated to a
Mobile Users
group (provided
by your system manager).
•
At each INDeX site, the 20DT must be subscribed to the system (see below).
•
The 20DT must be set to
Auto
when setting up for "Switching Between Systems"
(see page 14). This only needs to be done once at any site.
Hot Desking
A 20DT can be used as a
Hot Desk
phone.
Hot Desk
users can log onto multiple sites,
linked by INDeX net. However, the
Hot Desk
user must use a 20DT handset that remains
on a particular site. To activate this facility the following actions are required:
•
At each INDeX site, the 20DT must subscribe to the system (see below).
•
At each INDeX site, each 20DT's number must be set as a
Hot Desk Mobile Users
type (provided by your system manager).
•
At each 20DT that is being used as a Hot desk phone must be allocated (by your
System Manager) two numbers. One to log on with and one to log off with (see
below).
