20CC Telephone User Guide
Page 27
IP Office
40DHB0002UKAJ Issue 6b (2nd December 2004)
Ringer Controls
Changing the Ringer Volume
While altering the volume, the phone rings.
To change the ringer volume:
1. Press
PROGRAM
and then
z
RINGER
.
2. Enter the phone's passcode
(see The Phone Passcode)
.
3. Press
z
VOLUME
. The display shows a slider. Adjust this using the
z
-keys on its left (softer) or
right (louder).
4. Press
PROGRAM
to finish.
Changing the Ringer Sound
The ringer sound contains three tones. You can adjust the 'mix' of these to achieve your own distinctive
ring. While doing this the phone rings.
To change the ringer sound:
1. Press
PROGRAM
and then
z
RINGER
.
2. Enter the phone's passcode
(see The Phone Passcode)
.
3. Press
z
SOUND
. The display shows a slider. Adjust this using the
z
-keys on its left and right.
4. To select another part of the sound to adjust, press
z
TONE
. This changes the slider to a different
tone.
5. Press
PROGRAM
to finish.
Switching the Ringer On/Off
You can switch the ringer on or off for internal and/or external calls. This does not affect the information
displayed.
For internal calls you can also select
AUTO ANSWER
to connect internal calls after giving just a single
ring.
To switch the internal or external ring on/off:
1. Press
PROGRAM
and then
z
RINGER
.
2. Enter the phone's passcode
(see The Phone Passcode)
.
3. Press
z
SCROLL
and then press
z
EXTERNAL
or
z
INTERNAL
. The display shows the current
setting.
4. To change the ringer mode, press
z
CHANGE
to select
ON
,
OFF
or
AUTO ANSWER
.
5. Press
PROGRAM
to finish.
