Option
Description
Option
Description
Allow IP Call
Use this check box to enable dialing out with IP
address.
Play Dialing DTMF Tone
Use this check box to enable playing DTMF tone
when the user presses keys at dialing. The default
is enabled.
Play Talking DTMF Tone
Use this check box to enable playing DTMF tone
when the user presses keys during taking. The
default is enabled.
Caller ID Display Priority
Use this option to set caller ID display priority. The
default priority is Phonebook > SIP Display Name >
SIP URI.
Hotline Number
Use this option to set the
hot line number
Hotline Delay
Use this option to set the
hot line delay time.
Audio page
To access this page, click the
Phone settings
tab and then click
Audio
.
The following table describes the audio configuration settings for the Avaya H229 phone. Only
supported options are described. Some unsupported features are displayed in the web interface,
but they are not described in this table.
Option
Description
Option
Description
First Codec
The first preferential
DSP codec.
Second Codec
The second preferential
DSP codec.
Third Codec
The third preferential
DSP codec.
Fourth Codec
The fourth preferential
DSP codec.
Fifth Codec
The fifth preferential
DSP codec.
Sixth Codec
The sixth preferential
DSP codec.
Onhook Time
The least reflection time
for when the handset is
down. The default is 200
ms.
Handset Volume
Use this option to set the
handset volume. The
value must be from 1 to
9.
Tone Standard
Country standard of call
progress tones, including
dial tone, busy tone, and
ring-back tone.
Default Ring Type
If the caller ID of an
incoming call is not
configured with a
specific ring type, the
default ring is used.
Table continues…
Phone Settings tab
October 2019
Installing and Administering the Avaya H229 Phone
37
