3. In
Mode
, select one of the following:
• To configure the server, select
Hotspot
.
• To configure the client, select
Client
.
4. In
Monitor Type
, select one of the following:
•
Multicast
: To limit the broadcast packets.
•
Broadcast
: To send packets to all clients.
5. In
Monitor Address
, enter the broadcast address.
The monitor address should be the same for the hotspot server and the hotspot client.
6. In
Remote Port
, enter the remote port number.
7. In
Local Port
, enter the local port number.
8. In
Name
, enter the SIP hotspot name.
9. In
Line Settings
, select
Enable
and click
Apply
.
When configuring the SIP hotspot server, in the device table, you can view hotspot client
information, such as the client IP address, MAC address, and the hotspot extension
number.
When configuring the SIP hotspot client, in the device table, you can view hotspot server
information.
Phone Settings tab
The following sections describe the options that you can access from the Phone Settings tab.
Features page
To access this page, click the
Phone Settings
tab and then click
Features
.
The following table describes the common configuration settings for the Avaya H229 phone. Only
supported options are described. Some unsupported features are displayed in the web interface,
but they are not described in this table.
Option
Description
Option
Description
Common Settings
Table continues…
Web portal navigation
October 2019
Installing and Administering the Avaya H229 Phone
34
