j. In the AUTOUPDATE CONFIG MODULE section of the configuration file template, set
Download Mode
to
2
and
Download Interval
to
1
.
k. Upload the configuration file on the file server.
6. Navigate to
Line
>
SIP
>
Basic Settings
to configure the SIP server settings, which are
described in
on page 23.
7. Navigate to
Line
>
SIP
>
Advanced Settings
>
Transport Protocol
to select the protocol
for SIP transmission.
The line can use TCP, UDP, or TLS for SIP transmission.
Related links
on page 17
Configuring phone provisioning by using Plug and Play
About this task
Use this procedure to enable SIP Plug and Play.
Procedure
1. On the web portal, navigate to
System
>
Auto Provision
.
2. In SIP Plug and Play section, do the following:
a. Select the
Enable SIP PnP
checkbox.
b. In
Server Address
field, enter the server IP address.
c. In
Server Port
field, enter the port number.
d. From
Transportation Protocol
drop down, select the appropriate protocol.
e. In
Update Interval
field, enter an update interval period in hours.
You can enter a value from 1 to 99 hours.
For example: If you set the
Update Interval
to 1 hour, then the phone automatically
checks the configuration file for updates every hour.
f. Click
Apply
when you are ready to apply your changes.
3. Open the configuration file.
4. In the AUTOUPDATE CONFIG MODULE section of the configuration file template, set
PNP
Interval
to
1
.
5. Upload the configuration file on the file server.
Related links
on page 17
Phone settings configuration and management
October 2019
Installing and Administering the Avaya H229 Phone
16
