Avaya H.323 9621G Скачать руководство пользователя страница 60

Страница: 60 / 94

Resetting system values

About this task

Note:

When updating Craft procedures from a touch screen deskphone, touching the line you want

to change or the applicable softkey produces the same result as selecting a line and pressing

the applicable softkey on a non-touch screen IP deskphone.

Use the following procedure to reset all system initialization values to the application software

default values.

Caution:

This procedure erases all static information, without any possibility of recovering the data.

Procedure

1. Select RESET VALUES from the Craft Local Procedures screen. The deskphone

displays the following text:

Press Reset to confirm.

2. Press

Cancel

to return to the Craft Procedures screen without resetting the

deskphone.
Press

Reset

to start the deskphone reset.

The deskphone resets from the beginning of registration, which might take a few
minutes. The deskphone resets:

• All system values and system initialization values except AUTH and NVAUTH

to default values.

• The 802.1X ID and Password to their default values.

• Call server values to their defaults.

• Any entries in the Redial buffer.

• Do not affect user-specified data and settings like Contacts data or the

deskphone login and password. To remove this type of data, see

Clearing the

deskphone settings

on page 51.

Using Local Administrative Craft Options

60 Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013

Comments? [email protected]

Содержание H.323 9621G































































































Результаты поиска

Содержание H.323 9621G

Отзывы:

Avaya H.323 9621G, Установка и обслуживание, Страница: 60 / 94

Результаты поиска

Содержание H.323 9621G

Отзывы: