Avaya G700 Скачать руководство пользователя страница 729

Страница: 729 / 808

Upgrade the S8300

Issue 10.2 May 2007

729

Note:

Note:

If an

Action Cancelled

message appears before the success message, refresh

the screen and click

Change

again.

When the configuration change is complete, the screen displays

Successfully configured

ethernet interfaces

. Click

Close Window

At this point, the system resets the IP interfaces.

Enabling RAM disk on the media server

To enable RAM disk, perform the following steps:

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP

address of

192.11.13.6

2. At the command line, type

sudo ramdisk -v -f enabled

, and press

Enter

3. At the command line, type

ramdisk -v -s

and press

Enter

Rebooting the media server

To reboot the media server, perform the following steps:

1. On the Maintenance Web Interface, under Server select

Shutdown Server

2. Select the

Delayed Shutdown

option. Also, be sure the

Restart server after shutdown

checkbox is selected.

3. Click the

Shutdown

button.

Click

to confirm.

4. At the command line, type

ramdisk -v -s

and press

Enter

Confirm that the system has enabled RAM disk.

Note:

Note:

It is good practice to close the browser after the reboot and log back in.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 729 / 808

Результаты поиска

Содержание G700

Отзывы: