Avaya G700 Скачать руководство пользователя страница 714 | Manualshive

Страница: 714 / 808

Avaya G700 Скачать руководство пользователя страница 714

Manual upgrade of an existing S8300B and G700 to S8300C with R4.0

714 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

Remastering the hard drive and installing the software

To begin the upgrade

1. Click

Start > Run

to open the

Run

dialog box.

2. Type

telnet 192.11.13.6

and press

Enter

.

The

first RP screen appears.

The first RP screen

I

Tip:

Tip:

To navigate on these screens, use the arrow keys to move to an option, then
press the space bar to select the option. Press

Enter

to submit the screen.

Note:

Note:

At this point, the installation script looks for the software CD on the DVD/CD drive
connected to the USB port. If the DVD/CD drive was not attached to a USB port
when the S8300 booted, you will not see any activity on the screen. In this case,
perform the following steps:

- Press the Shut Down button on the S8300 Media Server.

- When the OK-to-remove light comes on, connect the DVD/CD-ROM drive to a USB

port and reseat the S8300 in its slot.

3. Select

Install

and press

Enter

.

The

Select Release Version

screen appears.

«
...
712
713
714
715
716
...
»

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов