Avaya G700, Установка и обновление, Страница: 697 / 808

Before going to the customer site
Issue 10.2 May 2007 697
Ensuring a super-user login exists
A super-user login must be administered prior to upgrading the S8300 Media Server. The
project manager, remote services, or the customer should check to verify that one exists. If a
super-user login must be added, you must log in as dadmin or a higher level of login. For
pre-4.0 releases, you cannot add the login by logging in as craft.
!
Important:
Important:
The Communication Manager Web pages for the upgrade might time out if too
much time elapses without activity. In this case, you might not be able to log in
again with the craft login. This problem can occur after you install the new media
server and restore translations and security files, but
before you install the new
authentication file. In such a case, you also cannot login with other higher-level
services logins such as INADS. However, you
can relogin with the customer’s
super-user login, if it exists. Then you can install the new authentication file and
complete the upgrade.
Therefore, it is critical that you ensure that a super-user login exists before you
perform the upgrade. In addition, you should retrieve the super-user login and
password from the customer prior to performing the upgrade.
Checking a pre-4.0 release
To ensure that a super-user login exists in Communication Manager prior to Release 4.0:
1. Log in with
telnet
or
ssh
.
2. At the SAT command line, enter
list logins
The Logins screen appears.
3. Under the Service Level column, look for a login that has either the
dadmin
or
super-user
level.
list logins
LOGINS
Login Service Status Pwd. Aging ASG Blk Expiration No. of Sess.
Level Cycle (Days) Date Sess. Used
init init active y n / /
inads inads inactive y n / /
dadmin dadmin inactive n n / /
craft craft inactive y n / /
acpsnmp non-super-user void n n / /