manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 681 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 681

Post-upgrade tasks

Issue 10.2 May 2007

681

 

3. Type 

save translation

 and press 

Enter

.

When the save is finished, the system displays the message, 

Command successfully completed.

If using IA770, administering switch integration for H.323

The IA770 INTUITY AUDIX Messaging application uses H.323 signaling instead of the CWY1 
board for integration with Communication Manager. The tasks for administering the H.323 
integration are explained in 

Administering Media Servers to work with IA770

.

Testing to verify system functionality

Test the system for functionality, if you are upgrading an S8300 primary controller;

1. Verify the following:

●

Telephones have dial tone

●

You can call from one telephone to another telephone on the system

●

You can make an external trunk call.

●

The media gateways have registered. Use the SAT command 

list media-gateway

.

Completing the upgrade process 
(S8300 is the primary controller)

Telnet to the S8300 (primary controller) and open a SAT session:

1.

To check media modules

on page 682

2.

To enable scheduled maintenance

on page 682

3.

To busy out trunks

on page 682

4.

To check for translation corruption

on page 682

5.

To resolve alarms

on page 682

6.

To re-enable alarm origination

on page 683

7.

Backing up the system

on page 683

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов