Avaya G700 Скачать руководство пользователя страница 649 | Manualshive

Страница: 649 / 808

Avaya G700 Скачать руководство пользователя страница 649

On-site Preparation for the Upgrade

Issue 10.2 May 2007

649

6. To check the status of the backup:

a. Under

Data Backup/Restore

, click

Backup History

.

b. Select the backup file and click

Check Status

to open the

Backup History Results

screen.

When the backup is finished, the

Backup History Results

screen displays

The final status for your backup job is shown below.

For each backup set, the message

BACKUP SUCCESSFUL

displays, if the set was backed up successfully.

7. If the AUDIX options are available, repeat Steps 3–6 for AUDIX Announcements.

Copying and installing the service pack files to the media server
(starting from R2.x only)

Note:

Note:

Do not perform this task if you are upgrading an R3.0 release to R4.0.

A pre-upgrade service pack is required to modify the server upgrade tools, including the web
Interface and upgrade scripts, which will enable the upgrade to Communication Manager 4.0 to
complete successfully.

To copy pre-upgrade service pack file to the media server

1. Insert the software CD in the CD-ROM drive of your laptop.

2. On the Maintenance Web Interface, under Miscellaneous, click

Download Files

.

3. Select the download method, “Files to download from the machine I’m using to connect to

the server.”

Note:

Note:

Do not

select the checkbox, “Install this file on the local server.”

4. Browse to the directory on the software CD (or laptop) that contains the pre-upgrade service

pack file.

5. Select the pre-upgrade service pack file and click

Download

.

To install the pre-upgrade service pack

Note:

Note:

Use a telnet session to install and activate the service pack file.

«
...
647
648
649
650
651
...
»

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов