Avaya G700 Скачать руководство пользователя страница 603

Страница: 603 / 808

Replacing the S8300A

Issue 10.2 May 2007

603

If you upgraded IA 770 without a new license file, it will fail to start during the Communication
Manager startup sequence.

If this occurs, you must do the following steps:

1. Obtain an IA 770 Replace variable w/ release number license file.

2. Install the license file.

3. From a command prompt, start the IA 770 process with the following command:

start -s Audix

Saving translations

Note:

Note:

If the S8300 you are upgrading is an

LSP

, perform this task on the primary

controller.

To save translations

1. In the SSH session, open a SAT session. and log in as

craft

(or

dadmin

2. If the S8300 you are upgrading is a primary controller, at the SAT prompt, type

save

translation

and press

Enter

3. If the S8300 you are upgrading is an LSP, then on the primary controller, type

save

translation lsp

and press

Enter

. This command distribute saved translations out to

the LSPs.

When the save is finished, the system displays the message,

Command successfully completed.

The system automatically performs a reset system 4. If you are upgrading an LSP, you are
logged out.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 603 / 808

Результаты поиска

Содержание G700

Отзывы: