manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 589 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 589

Replacing the S8300A

Issue 10.2 May 2007

589

 

Restoring data backup

Do these tasks:

●

if the original release was between 

1.2.0

 and 

1.3.9

, and you performed a Linux Migration 

backup

●

or if the original release was 

2.0

 or later and you performed a normal data backup

!

CAUTION:

CAUTION:

If you used the Linux Migration Backup/Restore backup process, there will be a 
single backup file with a name starting with "upgrade-2.0." Be sure to restore that 
backup file, not the backup sets that you may have created with the Data Backup/
Restore — Backup Now process. If you restore the wrong files, the system can 
be damaged and the only recovery path is to remaster the S8300 hard drive 
again. This recovery procedure can be started using the 

remaster

 command, 

which is described in 

Maintenance Commands for Avaya Communication 

Manager, Media Gateways and Servers

, 03-300431. After running the remaster 

command, reboot the S8300 to start the RP program and proceed with 

Remastering the S8300 and installing the upgrade software

on page 577.

To restore backup data:

1. On the Maintenance Web Interface, under Data Backup/Restore select 

View/Restore Data

.

The system displays the 

View/Restore Data

 screen.

View/Restore Data screen

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов