Avaya G700 Скачать руководство пользователя страница 561

Страница: 561 / 808

Preparing for the upgrade to R4.0 on-site

Issue 10.2 May 2007

561

Note:

Note:

Be sure to reset alarm origination after the upgrade.

3. Type

almenable

(without any options) to verify the alarm origination status.

You should see:

incoming: enable

Dial Out Alarm Origination: neither

SNMP Alarm Origination: n

Getting IA770 data and stopping IA770
(if IA770 is being used)

Skip to

Backing up system files

on page 565 if IA770 is not being used.

If IA770 is being used, you need to collect data, leave a test message, and shut down IA770
before backing up the files.

Creating an IA770 test message (R2.0 only)

To test IA770 after the migration

1. Write down the number of a test voice mailbox, or create one if none exists.

2. Write down the number of the IA770 hunt group.

3. Leave a message on the test mailbox that will be retrieved after the migration.

Determining whether optional languages are needed

To determine the system language

1. On the Maintenance Web Interface, under Miscellaneous select

Messaging

Administration

2. Select

Global Administration

then

Messaging Administration

3. Enter the

craft

password.

4. At the command prompt, enter

display system-parameters features

The

System-Parameters Features

screen displays.

5. Go to page 3.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание G700

Отзывы:

Avaya G700, Установка и обновление, Страница: 561 / 808

Результаты поиска

Содержание G700

Отзывы: