Avaya G700 Скачать руководство пользователя страница 546 | Manualshive

Страница: 546 / 808

Avaya G700 Скачать руководство пользователя страница 546

Manual upgrade of an S8300A and G700 to R4.0

546 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

●

Security update files

●

G700 firmware file (most recent version)

Obtaining service pack files, if needed

If one or more service packs are required for this installation or upgrade procedure, and the
service pack files are not on your software CD, download the service pack files from the Avaya
Support web site to your laptop.

Service packs may or may not be needed, depending on the release of Communication
Manager. For both new installations and upgrades, you may need to install a service pack after
the installation or upgrade. For an upgrade, you may need a service pack before the upgrade as
well.

To download a service pack

1. On your laptop, create a directory to store the file (for example, c:\S8300download).

Table 36: R4.0 Upgrade requirements depending on pre-upgrade release

Software Release
Before Upgrade to
Release 4.0

Upgrade Requirement

Release 1.2.x, 1.3.1.
R011x.02.110.4
R011x.03.526.6

You must apply a pre-upgrade service pack to the system files
before backing up the system and translations files using Linux
Migration Backup/Restore (LMBR). Once the hard drive is
remastered and the new software is installed on the S8300B or C,
you can restore all the files using LMBR

1

.

1. The LMBR backup contains backup sets for the translations, OS and system files.

Release 1.3.1.x
R011x.03.1.531.0
R011x.03.1.5xx.x

No pre-upgrade service pack required. Back up the system and
translations files using Linux Migration Backup/Restore (LMBR).
Once the hard drive is remastered and the new software is
installed on the S8300B or C, you can restore all the files using
LMBR.

Release 2.0.x
R012x.00.0.000.0
R012x.01.x.xxx.x

No pre-upgrade service pack is required for the Linux backup.
Back up the system and translations files using Data Backup/
Restore

2

. Once the hard drive is remastered and the new

software is installed on the S8300B or C, you can restore the files
using Data Backup/Restore.

2. The Data backup contains backup sets for the translations, OS and system files, security files, and AUDIX

data, if any.

«
...
544
545
546
547
548
...
»

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов