manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 511 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 511

Prepare to install firmware on the G700

Issue 10.2 May 2007

511

 

b. Log in as craft.

c. At the Linux prompt, type 

cd /var/home/ftp/pub,

 and press 

Enter

.

d. The Linux prompt reappears. The current directory has changed to /var/home/ftp/pub.

e. At the Linux prompt, type 

cp

 <

firmware_filename

> 

/tftpboot

, and press 

Enter

 to 

copy a single firmware file to the /tftpboot directory. To copy multiple firmware files (most 
firmware files have an .fdl suffix), use the command 

cp *.fdl /tftpboot

.

f. The Linux prompt reappears. The firmware file or files have been copied to the /tftpboot 

directory.

g. Repeat step 4, if necessary, for other firmware files you want to install.

h. At the Linux prompt, type 

cd

 

/tftpboot

.

i. The Linux prompt reappears. The current directory has changed to /tftpboot.

j. At the Linux prompt, type 

ls

, and press 

Enter

.

k. A list of files in the directory appears.

l. Check the directory to make sure the firmware files you want to install are listed.

Determining which firmware to install on the G700

Conduct the following procedure to compare software versions running on the G700 processors 
and media modules with the versions in you planning documents. If the versions do not match, 
you need to install the new firmware for those components. 

To determine if new firmware for the P330 stack processor is necessary

1. At either the 

P330-1(super)#

 or 

P330-1(configure)#

 prompt, type 

dir

.

The system displays the directory list of software for the P330 stack processor.

Directory list for P300 stack processor

2. Check the version number (ver num) of the EW_Archive file to see if it matches the Release 

Letter. 

If not, you must upgrade the P330 stack processor.

M# file 

ver num  file type 

file location 

file description

-- ---- 

-------  ---------- 

------------- 

----------------

1 module-config  N/A 

Running 

Conf Ram 

Module 

Configuration

1 stack-config 

N/A 

Running 

Conf Ram 

Stack 

Configuration

1  EW_Archive

 

4.0.4 

SW Web Image  NV-Ram 

WEB Download

1  Booter_Image

 3.2.5

SW BootImage  NV-Ram 

Booter Image

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов