Avaya G700, Установка и обновление, Страница: 327 / 808

Installation and wiring of telephones and power supplies
Issue 10.2 May 2007 327
Figure 26: Connecting telephones and other end devices to the 1152A1 PDU
For Data-In ports connect the Ethernet cable leading from the Ethernet Switch/Hub to the Data
port. For Data & Power Out ports connect the Ethernet cable leading to the telephone or other
end device to the corresponding Data & Power port.
Note:
Note:
Be certain to connect correspondingly numbered Data and Data & Power ports.
Connecting cables to telephones and other end devices
The 1152A1 PDU contains line-sensing capabilities that enable it to send power only to end
devices designed to receive power from the LAN. These end devices, termed Power over LAN
Enabled, receive power once they are connected to the 1152A1 PDU.
To safeguard devices that are not enabled, the 1152A1 PDU detects devices that are not
enabled so does not send power. Note that data continues to flow using the Ethernet cable
regardless of the status of the end device.
End devices that are not enabled to receive power directly may receive power and data through
an external splitter. The external splitter separates the power and data prior to connection to the
end device (see
Figure 27: Connecting an IP telephone with an external splitter on page 328).
End Device
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8
RJ-45 IN RJ-45 OUT
Ethernet
Switch/Hub
5- 5-
data
data
data
DC +
data
DC -
data
data
data
data
spare
spare
spare
spare
Da
ta
In
Da
ta
&
P
ow
e
r O
u
t
DC +
DC -
$3RZHU'LVWULEXWLRQ8QLW