manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 247 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 247

Before going to the customer site

Issue 10.2 May 2007

247

 

Checking the CD for the most recent files

The media module and media gateway firmware on the Communication Manager software 
distribution CD may not be the most recent. Therefore, check the firmware versions contained 
on the software CD to verify that you have the latest before installing the firmware using the 
LSP’s TFTP server. You can do this by accessing the CD on your laptop and displaying the 
actual firmware filenames in the Releases\<

release_number>\Gateways directory. 

For example, the CD may contain a file mm760v60.fdl, but the most recent firmware available 
on the Avaya Web site is mm760v65.fdl. In this case, download the mm760v65.fdl file from the 
Web site for installation instead of installing the file from the CD. As another example, the CD 
may contain the mgp_25_23_0.bin media gateway file, and the Avaya Web site also contains 
mgp_25_23_0.bin. In this case, you could use the firmware from the CD because the versions 
of the files are the same.

!

CAUTION:

CAUTION:

If you are a customer administrator, you might be required to access the 

Download Center

 Web site in order to download firmware. For instructions on 

setting up access to the Download Center, access 

http://support.avaya.com

 and 

click on the appropriate links.

Obtaining service pack files

Pre- and post-upgrade service packs may be needed for this upgrade. If the service pack files 
are not on your software CD, download the service pack files from the Avaya Support web site 
to your laptop.

Pre-upgrade service pack (starting from R2.x only)

This upgrade requires a pre-upgrade service pack. The service pack filename differs, 
depending on which software load the media server is on. See 

Table 13: Pre-Upgrade service 

pack filenames for software release and load

 for the software load associated with each 

release.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов