manualshive.com logo in svg

Avaya G700, Установка и обновление, Страница: 204 / 808

Поделиться
Скачать
Avaya G700 Скачать руководство пользователя страница 204

Installing a new G700 without an S8300 using the Gateway Installation Wizard

204 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

To obtain the TFTP server software and install it, see 

Appendix D: Install the Avaya TFTP 

server

.

Downloading G700 firmware files to your TFTP directory 

To install new firmware for the G700 processors and the media modules, you first need to move 
the new firmware files to a directory on the TFTP server. The installation program reads the new 
firmware files from this directory on the TFTP server.

Perform one of the two procedures in this section, depending on whether you have a bundled 
tar.gz file on a CD or wish to download individual firmware files from the Avaya Support website.

Downloading individual firmware files

Download the firmware files from the Web to your TFTP directory

Note:

Note:

The sequence of links on the website may be somewhat different than described 
here.

1. Access the 

http://www.avaya.com/support

 website.

2. Navigate to Firmware Downloads for The G700 Media Gateway.

The system displays a list of firmware files.

3. Locate the file names that match the files listed in your planning documentation. 

The file names will approximate those listed in 

Table 10

. 

Note:

Note:

The latest firmware versions may different from those listed in 

Table 10

. Also, the 

appropriate firmware version may depend on the hardware vintage and/or on the 
release of Communication Manager. See 

Communication Manager Software/

Firmware Compatibility Matrix

 under Downloads on 

support.avaya.com

.

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов