Avaya G700 Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 808

Avaya G700 Скачать руководство пользователя страница 111

Issue 10.2 May 2007

111

Section 2: G700 installation

and upgrades - wizards

This section contains procedures to install or upgrade an Avaya G700 Media Gateway
controlled by an Avaya S8300, S8400, S8500, or S8700-series Media Server, using one of the
available Avaya wizard tools. Information on connecting telephones and adjuncts to the G700 is
presented in

Chapter 7: Telephones and adjunct systems

Three tools are available for your use (for the latest versions, go to

http://support.avaya.com/

):

●

Avaya Installation Wizard

See

Job Aid: Avaya Installation Wizard,

555-245-754.

●

Gateway Installation Wizard

See

Job Aid: Avaya Gateway Installation Wizard,

555-245-756.

●

Upgrade Tool

See

Job Aid: Upgrade Tool and Worksheets,

555-245-757.

Note:

Note:

These tools replace many normal installation or upgrade procedures in this
section. However, they do not automate all of the tasks associated with an
installation or an upgrade. Where a task or tasks must be performed manually,
this is noted in subsequent chapters of this section.

This section is organized into the following chapters:

●

Chapter 3: Installing a new G700 with an S8300 using the Avaya Installation Wizard

●

Chapter 4: Installing a new G700 without an S8300 using the Gateway Installation Wizard

●

Chapter 5: Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

●

Chapter 6: Upgrading an existing G700 without an S8300 using the Upgrade Tool

Note:

Note:

Manual procedures to perform these tasks have been retained for completeness,
and may be found in

Section 3: G700 installation and upgrades - manual

«
...
109
110
111
112
113
...
»

Содержание G700









































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов