Avaya G600, Инструкция по установке

Страница: 234 / 274

234 Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Accessing the Avaya S8700 Media Server
May 2003
3 In the LAN Settings box (lower righthand), check "Bypass proxy server for local
addresses"
4 Click OK, OK
For Netscape 6.2:
1
Click Edit > Preferences
2 Select Advanced > Proxies
3
Select "Direct connection to the Internet"
4 Click OK.
To use the Maintenance Web Interface, open either the Netscape or MS Internet Explorer Web
browser. If a direct connection, in the Location/Address field, type 192.11.13.6. If a remote
connection, in the Location/Address field, type in the IP address or DNS host name of the
specific media server. When prompted, log in.
Command line interface
Telnet: To use a command line interface in a Telnet window, click Start > Run to open the Run
dialog box. If a direct connection, type telnet 192.11.13.6. If a remote connection, type in the IP
address of the active media server. (SAT commands are usable only on the active media server
only.) When prompted log in.
Terminal Emulation: To use a command line interface in a terminal emulation window open
your terminal emulation application. The terminal emulation program port settings must be
configured as follows:
• 9600 baud
•
No parity
• 8 data bits
•
1 stop bit
• No flow control
NOTE:
The only terminal emulation programs supported are Avaya™ Terminal Emulator and
Microsoft’s HyperTerminal. Terranova is no longer supported.
Establish a network connection to the active media server using either the IP address or the
DNS host name. Use port 5023 for this connection. (SAT commands are usable only on the
active media server only.) When prompted, log in.
Avaya Site Administration
If you do not have Avaya Site Administration, you must purchase it separately. It is part of the
Avaya VisAbility Suite. See
‘‘Installing Avaya Site Administration’’ on page 235 for
information on installing Avaya Site Administration.