Avaya G450 Manager, Справочное руководство CLI

Страница: 806 / 1334

CLI Commands Port redundancy
806 Avaya G450 CLI Reference
set port redundancy-intervals
Use the
set port redundancy-intervals
command to configure the two time constants
that determine redundancy switchover parameters.
Syntax
set port redundancy-intervals min_time_between_switchovers
{ switchback_interval | none}
Parameters
User Level
read-write
Context
general
Example
To specify a delay of 100 milliseconds before switching to the backup port, and a requirement
that the primary port be up for 20 milliseconds before control is returned:
G450-001(super)# set port redundancy-intervals 100 20
Related Commands
set port redundancy , set port redundancy enable|disable , show port redundancy
Parameter Description Possible
Values Default
Value
min_time_
between_
switchovers
The minimum time, in milliseconds,
between redundancy switchovers for
each pair 0-65000
switchback_
interval
The period, in milliseconds, the
primary port link has to be up before
the system switches back.
Specify
0 to indicate the system never
switches back.
Specify
1 to indicate that switchback
occurs immediately after the primary
port link returns.
0-65000
none
Keyword indicating not to switch