Avaya G450 Manager, Справочное руководство CLI

Страница: 691 / 1334

Policy - access control lists
Issue 1 January 2008 691
ip-protocol
Use the
ip-protocol
command to specify that the current rule applies to packets having the
specified IP protocol.
Use the
no
form of the command to set the IP protocol to its default value.
Use the
not
form of this command to specify that the current rule applies to all packets except
those having the specified IP protocol.
Syntax
[not] ip-protocol protocol_name | protocol_number
no ip-protocol
Parameters
User Level
read-write
Context
ip access-control-list/ip-rule, ip capture-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule,
crypto-list/ip-rule
Note:
Note:
The not form of the command is not relevant in the crypto-list/ip-rule context.
Example
To specify that rule 22 applies to all packets having an IP protocol of ICMP:
G450-001(ACL 330/ip rule 22)# ip-protocol icmp
To specify that rule 22 applies to all packets having any IP protocol except ICMP:
G450-001(ACL 330/ip rule 22)# not ip-protocol icmp
Related Commands - Packet sniffing
destination-ip , dscp (policy-based routing, packet sniffing, VPN) , icmp , show ip capture-list ,
source-ip , tcp destination-port , tcp source-port , udp destination-port , udp source-port
Parameter Description Possible
Values Default
Value
protocol_name
Name of the IP protocol to match
protocol_number
Number of the IP protocol to match 1-255