Avaya G450 Manager, Справочное руководство CLI

Страница: 550 / 1334

CLI Commands Logging
550 Avaya G450 CLI Reference
set logging server condition
Use the
set logging server condition
command to specify a filter for messages sent
to the specified Syslog server. Messages can be filtered by source system, severity, or both.
Syntax
set logging server condition {all | Msgfacility } {none | severity }
ip_address
Parameters
Parameter Description Possible Values Default
Value
all
Keyword specifying to apply
this filter to all message
facility systems
MsgFacility
Apply this filter to messages
produced by a specific
system boot , dialer , policy,
snmp , usb-modem,
cascade , dnsc , ppp , stp ,
vlan , cdr , fan , pppoe ,
supply , voice , cli , filesys ,
qos , switchfabric , wan ,
cna_tp , ipsec , router ,
system , config , isakmp ,
rtp-stat , tftp , console ,
lag , saa , threshold ,
dhcps , poe , security ,
tracker
none
Keyword specifying not to log
any messages
severity
Only log messages whose
severity level is equal to or
more severe than the
specified level. 0 is the
highest severity and 7 the
lowest severity. Use the text value or its
numeric equivalent:
emergency (0) ,
alert (1) ,
critical (2) ,
error (3) ,
warning (4) ,
notification (5) ,
informational (6) ,
debugging (7)
ip_address
The IP address of the Syslog
server