Avaya G450 Manager, Справочное руководство CLI

Страница: 315 / 1334

DHCP server
Issue 1 January 2008 315
start-ip-addr
Use the
start-ip-addr
command to set the start IP address of a DHCP pool. For manual/
reservation leasing, set the start IP address to be identical to the end IP address. Use the
no
form of this command to clear the start IP address of the pool. Since there is a combined limit of
256 IP addresses for all pools, clear both the start and end IP addresses in a pool using the
no
forms of
start-ip-addr
and
end-ip-addr
before you configure a new range.
Syntax
[no] start-ip-addr ip-addr
Parameters
User Level
read-write
Context
dhcp pool
Example
To set the start IP address of a DHCP pool to IP address 135.64.120.2:
G450-001(DHCP 5)# start-ip-addr 135.64.120.2
Related Commands
bootfile , client-identifier , default-router , dns-server , domain-name , end-ip-addr , lease , name ,
next-server , option , server-name , show ip dhcp-pool , subnet-mask , value ,
vendor-specific-option
Parameter Description Possible Values Default
Value
ip_addr
The start IP address of
the DHCP pool The start IP address must be smaller
than the end IP address.
The number of IP addresses in one
pool cannot exceed 256. 0.0.0.0