Avaya G430, Руководство пользователя

Страница: 388 / 696

• L3 rules that do not include the fragment criteria apply to initial fragments and non-
fragment packets
• L4 rules apply to initial fragments and non-fragment packets
Rule criteria commands
You can use the following rule criteria commands. These commands are described in more
detail below.
• dscp
•
ip protocol
• source ip address
• destination ip address
• tcp source-port
• tcp destination-port
•
udp source-port
• udp destination-port
• icmp
• fragment
Note:
You can also use the
description
command in the rule context to add a description of
the rule.
Applying rules to packets with DSCP values
Procedure
Use the
dscp
command, followed by a DSCP value (from 0 to 63) to apply the rule to
all packets with the specified DSCP value.
For example, the following rule is defined to capture all VoIP Bearer packets (DSCP =
46):
Gxxx-001(super)# ip capture-list 520
Gxxx-001(super-Capture 520)# ip-rule 20
Gxxx-001(super-Capture 520/ip rule 20)# composite-operation capture
Done!
Gxxx-001(super-Capture 520/ip rule 20)# dscp 46
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
Monitoring applications
388 Administering Avaya G430 Branch Gateway October 2013
Comments? infodev@avaya.com