manualshive.com logo in svg

Avaya G430, Руководство пользователя, Страница: 170 / 696

Поделиться
Скачать
Avaya G430 Скачать руководство пользователя страница 170

Administering DS1 parameters

Procedure

1. Enter 

ds1

 

slot-address

, where 

slot-address

 is any permitted port.

The command line prompt changes to 

super-sls/ds1-

<port-address>

. If you

want to remove the ds1 trunk from the SLS administration, enter 

exit

 to leave the

second-level ds1 context and return to the (super-sls)# context, and then enter

clear ds1

 

slot-address

.

 Note:

If configuration changes affecting trunk provisioning (such as, signaling and bit-
rate) are made to a DS1 trunk where the trunk and its associated signaling group
have already been provisioned, an error message instructs you that the

Administrative change is in violation with existing trunk
member provisioning

, and the configuration change is rejected.

2. Enter 

set name

 

name

 to identify the user name for the DS1 trunk.

Use the 1 to 27 character name as specified on Communication Manager (

add

trunk-group

 

n

). Type the name string inside double quotes.

3. Enter 

set bit-rate

 

rate

 to set the maximum transmission rate in Mbps for the

DS1 facility.
The rate can be either 1544 (T1) or 2048 (E1).

4. Enter 

set signaling-mode

 

mode-type

 to set the signaling mode for the DS1

facility, where 

mode-type

 is one of the following values:

• cas. Out-of-band signaling for E1 service, yielding thirty 64 kbps B-channels

for voice transmission

• robbed bit. In-band signaling for T1 service, yielding twenty-four 56 kbps B-

channels for voice transmission

• isdnpri. T1 or E1 ISDN Primary Rate service (supports both FAS and NFAS)

• isdnext. NFAS T1 or E1 ISDN service for:

- T1 facility, in which all 24 channels are for bearer transport

- E1 facility, in which all 31 channels are for bearer transport

5. Enter 

set channel-numbering

 

method

 to select the channel-numbering

method for B-channels on an E1 interface, where 

method

 is one of the following

values:

• seq. Sequential codes of B-channels 1-30 in the ISDN Channel Identification

IE

• tslot. Timeslot method

Standard Local Survivability (SLS)

170     Administering Avaya G430 Branch Gateway

October 2013

Comments? [email protected]

Содержание G430

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов