
Note:
The “*” and “#” characters are not available on rotary-dial, analog phones.
18. Enter
set pim-lockout no
to allow Provisioning and Installation Manager (PIM)
updates, since you finished SLS administration of the Branch Gateway.
19. At the Branch Gateway command prompt, enter
exit
to leave the sls context.
The Branch Gateway command prompt reverts to that of the original login.
20. After all of the SLS features are administered, at the Branch Gateway command
prompt enter
set sls enable
to enable SLS on the Branch Gateway.
Note:
If you enabled SLS and then entered additional administration, you must first
disable SLS by entering
set sls disable
, and then re-enable it by entering
set sls enable
. This will cause the SLS application to resynchronize its
administrative database with the Branch Gateway's CLI command database.
21. At the Branch Gateway command prompt, enter
copy running-config
startup-config
to save the changes.
Administering station parameters
Procedure
1. At the Branch Gateway command prompt, enter
station
extension class
to
enter a second-level sub-context to administer each phone that you want covered
by SLS.
In this command,
extension
is a 1 to 13 digit numeric string that may begin with
0, and
class
is analog, dcp, or ip.
For example,
station
1234567 ip
administers an IP phone with the extension
“1234567”.
The command line prompt changes to
sls-station
<extension>
to indicate
that you are in the station context for SLS administration. Entering
exit
ends the
station configuration mode, and the command line prompt returns to its original
state. If you want to remove the station from the SLS administration, enter
clear
station
extension
at the command line interface. Enter
exit
to leave the
second-level station context to return to the (super-sls)# context.
2. Depending on the class (analog, dcp, or ip, set in Step
on page 0 ), enter
set
type
model
, where
model
is a value from
Class values in SLS station context
on
page 168.
Standard Local Survivability (SLS)
166 Administering Avaya G430 Branch Gateway
October 2013
Содержание G430
