Avaya G250 Series, Быстрый запуск по установке оборудования

Страница: 15 / 36

Issue 3 February 2007 15
Chapter 3: Mount the Device
You can position the Avaya G250 Media Gateway on a suitable table, or mount it in a rack or on
the wall.
Positioning on a Table
To install the Avaya G250 Media Gateway as a tabletop unit:
1. Remove the four rubber standoffs from their package.
2. Turn the G250 upside down.
3. Position each foot into one of the mounting sites, near each corner of the chassis.
4. Press the plastic rivet into the foot with a stylus until the rivet is firmly seated on the chassis.
Mounting in a Rack
You can fasten the G250 to a standard 19-inch rack either at the front of the G250 or at its
middle. Attach the mounting brackets to the device before you mount the G250.