manualshive.com logo in svg

Avaya G150, Руководство по установке и настройке, Страница: 170 / 254

Поделиться
Скачать
Avaya G150 Скачать руководство пользователя страница 170

Voicemail for G150 Media Gateway

170 Installation and Configuration of the G150 Media Gateway

6. Leave the Voicemail Password and Confirm Password fields blank.

7. If this is the last configuration being performed on Manager, click  Save. In the Sending 

Config To dialog box, accept the selected save option and click OK. Otherwise, continue 
making additional configuration updates and perform a Save when ready.

User Specific Voicemail

Each user’s voicemail configuration in survivable mode can be individually configured within the 
User configuration. The default configuration setting is On.

To configure voicemail for each user:

1. Click  to receive a configuration form. The Receiving Config from dialog box appears 

displaying the IP address of the G150. Enter the G150 system password.

2. Click User from the Configuration Tree. Double-click the user you want to configure. An edit 

window for that specific user is displayed.

3. Click the Voicemail tab.

Figure 82: Manager’s User Specific Voicemail Configuration screen

4. The Voicemail On tick box is available for configuration. Tick the option.

●

If ticked, G150 (in survivable mode) will take voicemail messages for this user.

●

If unticked, G150 (in survivable mode) will not take voicemail messages for this use.

5. Click OK. 

6. If this is the last configuration being performed on Manager, click  Save. In the Sending 

Config To dialog box, accept the selected save option and click OK. Otherwise, continue 
making additional configuration updates and perform a Save when ready.

Note:

Note:

Saving this configuration can take up to 2 minutes because Voicemail Pro needs 
time to detect the G150. 

Содержание G150































































































































































































































































Отзывы:

Нет отзывов