manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 34 / 96

Поделиться
Скачать
Avaya Ethernet Routing Switch 8300 Скачать руководство пользователя страница 34

Type

Label

Color/State

Meaning

Amber/Steady

A transmit fault exists (FEFI).

Off

Normal–no faults detected.

RX

Green/Steady

The port is connected, but no traffic exists.

Green/Blinking

Data is passing through the port.

Amber/Steady

The port has either no link or no optical
signal.

Off

The port is not enabled.

Module

Online

Green/Steady

The module completed hardware and
software initialization, and is operating
normally.

Amber/Steady

The module is booting and initializing the
hardware. If the condition persists, the
steady amber light indicates that the module
failed the initialization self-test.

Off

The switch power is off.
This condition can also indicate that the
switch does not have sufficient power for the
module (for example, a card fault exists, or
the card is not fully plugged in).

8348GTX module

The 8348GTX module provides 48 autonegotiating (10BASE-T, or 1000BASE-T) ports.

The following figure shows the 8348GTX module.

Figure 11: 8348GTX module

The 8348GTX module supports standards-based 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s full-
duplex operation only.

Ethernet Routing Switch 8300 module fundamentals

34     Installation — Modules

May 2011

Содержание Ethernet Routing Switch 8300

































































































Отзывы:

Нет отзывов