manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 32 / 96

Поделиться
Скачать
Avaya Ethernet Routing Switch 8300 Скачать руководство пользователя страница 32

Type

Label

Color/State

Meaning

initialization and is
operating normally.

Amber/Steady

The module is booting
and initializing the
hardware. If the
condition persists, the
steady amber light
indicates that the
module failed the
initialization self-test.

Off

The switch power is off.
This condition can also
indicate that the switch
does not have sufficient
power for the module (for
example, a card fault
exists, or the card is not
fully plugged in).

8324FX module

The 8324FX module provides 24 100BASE-FX ports using MT-RJ connectors. The module is
nonblocking. Each 100BASE-FX port can operate in half- or full-duplex mode. The optical
transceivers provide transmission ranges up to 6562 ft (2 km) using 62.5 µm multimode fiber
cable or 4264 ft (1.3 km) using 50 µm multimode fiber cable.

 Warning:

Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look

into an optical fiber or connector port. Always assume that fiber optic cables are connected

to a light source.

The following figure shows the 8324FX module LEDs.

Ethernet Routing Switch 8300 module fundamentals

32     Installation — Modules

May 2011

Содержание Ethernet Routing Switch 8300

































































































Отзывы:

Нет отзывов