manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Руководство по установке, Страница: 30 / 96

Поделиться
Скачать
Avaya Ethernet Routing Switch 8300 Скачать руководство пользователя страница 30

Type

Label

Color/State

Meaning

Activity

Act (LED to right of
port)

Green/Blinking

The port is receiving or transmitting
data.

Off

The port is not transmitting data.

Module

Online

Green/Steady

The module completed hardware and
software initialization and is operating
normally.

Amber/Steady

The module is booting and initializing
the hardware. If the condition persists,
the steady amber light indicates that
the module failed the initialization self-
test.

Off

The switch power is off. This condition
can also indicate that the switch does
not have sufficient power for the
module (for example, a card fault
exists, or the card is not fully plugged
in).

8324GTX module

The 8324GTX module provides 24 autonegotiating (10BASE-T, or 1000BASE-T) ports.

The following figure shows the 8324GTX module.

Figure 7: 8324GTX module

The 8324GTX module supports standards-based 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s.

The following figure shows the 8324GTX module LEDs.

Ethernet Routing Switch 8300 module fundamentals

30     Installation — Modules

May 2011

Содержание Ethernet Routing Switch 8300

































































































Отзывы:

Нет отзывов