Avaya ERS 8600 series, Руководство по настройке

Страница: 354 / 420

Variable Value
NbrIfId A read-only field that indicates the interface ID that the neighbor
advertises in Hello packets on this link; the local interface index
for the neighbor.
RestartHelperStatus A read-only field that indicates whether the router is a hitless
restart helper for the neighbor,
• notHelping
• helping
RestartHelperAge A read-only field that indicates the remaining time in the current
OSPF hitless restart interval. The range is 1 through 1800.
RestartHelperExitReason A read-only field that indicates the outcome of the last attempt
to act as a hitless restart helper for the neighbor,
• none indicates no restart was attempted (default)
• inProgress indicates a restart attempt is currently underway
• completed indicates a completed restart
• timedout indicates a timed-out restart
• topologyChanged indicates a cancelled restart due to a
topology change
Viewing OSPF neighbor information
Two routers with interfaces to a common network are neighbors and appear on the Neighbors
tab for each neighboring router. The OSPF Hello protocol maintains and dynamically discovers
neighbor relationships. The exception is an NBMA network; you manually configure permanent
neighbors on each router eligible to become the DR.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6 .
2. Double-click OSPF .
3. Click the Neighbors tab.
Variable definitions
Use the data in the following table to configure the Neighbors tab.
Common procedures using Enterprise Device Manager
354 Configuration — IPv6 Routing November 2010