Avaya Definity SI, Руководство по обслуживанию, Страница: 299 / 2968

clear port
Issue 4 May 2002 8-49 555-233-123
clear port
This command removes maintenance marks from a port, freeing it for use.
copy update-file
In Duplex systems only, this command copies update files from the active SPE to
the standby SPE. This command recovers field update (“patch”) files that are
downloaded to the switch when the Standby SPE is unavailable. The switch
makes validation checks on the standby as it receives the file. If a newer, valid
update file exists on the standby, use the override option to force the copy.
Feature Interactions
■
The form display for the list configuration software-vintage command
allows INADS to determine the hardware configuration, software vintage,
and patch identifier.
■
Because patches are applied on restarts before the system is in normal
operation, no interaction with routine periodic or scheduled maintenance
exists.
■
The flash checksum test acts as a backup check to ensure entire field
update files are applied correctly. When the flash Checksum Test fails, a
MAJOR on-board alarm is raised on the processor/memory circuit pack.
Maintenance runs a data consistency test on a daily basis to check that
copies of translations, announcements, and software files are consistent
across both processors in a High or Critical Reliability System. If the test
detects a difference, a minor, off-board alarm is generated.
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
clear port location Port location (PCsspp)
Examples:
clear port 01c1102
init
inads
cust
nms none none
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
copy
update-file override Copies update files from
active to standby SPE,
regardless of the dates.
Examples:
copy update-file
copy update-file override
init
inads none See below