Avaya Definity SI, Руководство по обслуживанию, Страница: 296 / 2968

Maintenance Commands and Trouble-Clearing Aids
555-233-123 8-46 Issue 4 May 2002
clear audits
This command clears cumulative and/or peak hour’s data collected for each data
relation audit since the last clear audits command. Using this command before
the status audits command ensures that the status audits report reflects current
conditions.
Feature Interactions
Status audits displays data cleared by the clear audits command. After clear
audits executes successfully, the display audits cumulative and/or display
audits peak-hour commands display information collected since the last clear
audits command. The start date displays on the status audits screen reflects the
time that clear audits executed.
clear errors
This command moves errors and resolved alarms to the cleared-error list, making
room for new incoming error messages, but it does not clear active alarms from
the alarm log. This command must be used with care to prevent overwriting
cleared entries. When additional entries are needed to log new errors, the system
overwrites cleared errors first. Use the display errors command to list the cleared
errors.
Action/
Object
Qualifier Qualifier Description Logins Defaults
Feature
Interactions
clear
audits cumulative
peak-hour
Clears peak hour data
collected since the last
reboot or clear audits
cumulative command
Clears peak hour data
Examples:
clear audits cumulative
clear audits peak-hour
init
inads none See below
Action/
Object
Qualifier
Qualifier
Description
Logins Defaults
Feature
Interactions
clear
errors Examples:
clear errors init
inads
craft none none