Avaya Definity SI, Руководство по обслуживанию, Страница: 2887 / 2968

save translation
Issue 4 May 2002 A-83 555-233-123
If an inconsistency between the NETCON data module and the announcement
data module exists (e.g. both data modules using the same COR) the following
message appears:
System error, please try later
If the NETCON data module is not administered or out of service the following
message appears:
Required NETCON data module not
administered or out-of-service
If the NETCON data module is busy the following message appears:
Required NETCON data module unavailable
If the time of day is not set, the following message appears:
Please set the time of day before proceeding
If the standby SPE is inaccessible, the following message appears:
Cannot access the standby SPE at this time
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
save translation
Help Messages
If the system technician presses
HELP
after entering “save translation” the
following message appears:
Enter [’spe-active’ or ’spe-standby’]
Error Messages
If there is another tape activity currently running on the system, then the following
message appears:
A tape command is active;
this command is not allowed at this time
If the user chooses that save be done on the standby processor, and the standby
processor is inaccessible, then the following message appears:
Cannot access the standby SPE at this time