Avaya DEFINITY Server R, Руководство пользователя

Страница: 40 / 550

Upgrading Release 9/10r to Avaya DEFINITY Server R
Running Avaya Communication Manager
555-233-115 1-24 Issue 7 November 2003
Set Locations (if necessary)
After you set the daylight savings rules, you must set the locations for all switches.
It is possible to have switches in different time zones.
1. Type change locations and press
RETURN
.
2. Type y in the
ARS Prefix 1 Required for 10-Digit NANP
Calls?
field.
3. Type the information in the various fields for each switch.
NOTE:
Use the name of the switch or “Local Switch” in the Name field for the
first location.
4. Press
ENTER
to save the changes.
Set core dump vector (H/C only)
1. Type set vector f spe-maint and press
Enter
.
This command enables the system to perform a core dump in the event of
any system restart. The core dump can be used as a diagnostic tool to help
determine the cause of the restart.
Release MMI (High/Critical reliability only)
1. Type release board UUCSS and press
RETURN
to release the circuit packs
that you busied-out in the Busyout MMI Circuit Packs section.
Page 1 of 3
LOCATIONS
ARS Prefix 1 Required for 10-Digit NANP Calls? _
Number Name Timezone Daylight-Savings Number Plan
Offset Rule Area Code
1 Main________________ + 00:00 _1 303
2 ____________________ _ __:__ __ ___
3 ____________________ _ __:__ __ ___
4 ____________________ _ __:__ __ ___
5 ____________________ _ __:__ __ ___
6 ____________________ _ __:__ __ ___
7 ____________________ _ __:__ __ ___
8 ____________________ _ __:__ __ ___
9 ____________________ _ __:__ __ ___
10 ____________________ _ __:__ __ ___
11 ____________________ _ __:__ __ ___
12 ____________________ _ __:__ __ ___