Avaya DEFINITY Server R Скачать руководство пользователя страница 124

Страница: 124 / 550

Upgrading G3vs to an Avaya DEFINITY Server R
running Avaya Communication Manager

555-233-115

3-26

Issue 7 November 2003

Power Up the AUDIX System

■

If the AUDIX was removed from the cabinet:

1. Re-install the AUDIX and allow it to boot up automatically.

2. Check for AUDIX System errors.

■

If the AUDIX remained in the cabinet but power was removed from the
cabinet:

1. Power up the cabinet. The AUDIX reboots automatically.

2. Check for AUDIX System errors.

■

If the AUDIX remained in the cabinet and the cabinet was not powered
down:

1. At the AUDIX console, hold the

crtl

key and type cc.

2. Type 5 at the prompt. In about 2 minutes, the AUDIX boots up.

3. When the system initialization is complete, log in as craft.

4. Check for AUDIX System errors.

Содержание DEFINITY Server R







































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DEFINITY Server R

Отзывы:

Avaya DEFINITY Server R, Руководство пользователя, Страница: 124 / 550

Результаты поиска

Содержание DEFINITY Server R

Отзывы: