Page 30 - Using Windows CCFP Administration
Page 30
DECT - Installation Manual
The CCFP Administration Program
38HBKD0001SAH – Issue 14 (27th October 2003)
Using Windows CCFP Administration
The CCFP Administration Program
The CCFP Administration program is Version 8. The CCFP Administration
program (
see Uploading Flash Software on page 34
program for the on-line editing and management of the live DECT system
database.
Programming requires a PC with a 9-pin D-type serial port or a suitable
adapter
(see DCU to PC Programming Cable on page 69)
. Alternatively
modems can be used for remote connection
(
.
Note:
Version 5 of the CCFP Administration program contains
instructions/fields that are specific to Linked DECT Systems.
When using Version 5 of the CCFP Administration program on a
Solo DECT System, ignore any additional instruction/field error
messages. Version 5 of the CCFP Administration program
automatically determines and displays a message stating if DECT
is a 'Solo' or 'Master/Slave' configuration.
Installing CCFP Admin
The CCFP Admin program is supplied on floppy disks as a self-installing
program. It is also available from the web site
(
https://emea-businesspartner.avaya.com/index.asp
) as a self-extracting
file.
Important Note:
When first started, the CCFP program requires access
to the first setup disk (or the files from that disk) to
complete its installation.
Windows 95/NT
1. Insert the first floppy disk.
2. Click
on
Start
. Select
Settings
and then
Control Panel
.
3. Select
Add/Remove Programs
.
4. In
the
Add/Remove Programs Properties
menu click on the
Install/Uninstall
tab. Click on the
Install
button.
5. Windows will scan the floppy disk for a suitable installation file.
6. When it has located the file
setup.exe
on the floppy disk, click on
Finish
.
7. Follow the on-screen instructions for installing the CCFP Admin
program.
8. Start the CCFP program and follow the instructions to complete
installation.