Installation - Page 27
DECT - Installation Manual
Page 27
38HBKD0001SAH – Issue 14 (27th October 2003)
Switching Between Systems
Switching Between Systems
If the phone has been subscribed to several systems, you must select
which system to currently use. For multi-site working this only needs to be
performed once at each site provided that
AUTO
is selected when creating
a system (see below).
1. Press
MENU
and then
>
until
LOGIN
appears, then press
✓
.
SELECT
LOGIN
appears, press
✓
.
2. Press
>
until required
SYSTEM
number
appears.
3. When the required
SYSTEM
number
appears, press
✓
. Your handset
bleeps and
SELECT LOGIN.
Either, press
MENU
to exit, or , for multi-site working, press
✓
.
4. For multi-site working, you must visit each site and allocate a discrete
system number to it. E.g. for site 1, allocate
SYSTEM 1
and for site 2,
allocate
SYSTEM 2
, etc.
5.
Where multi-site working is required, press
>
until required
AUTO
appears and press
✓
.
(You only need to do this once at an site).
6. Your handset bleeps and
SELECT LOGIN
is displayed.
7. Press
MENU
to exit.
Auto Subscribing Handsets
When moving between two locations, both equipped with DECT systems,
you can set a handset to automatically subscribe to the other DECT
system provided that the handset at been registered on
both
systems
(consult your system manager for details).
To set auto subscription on a 20DT Handset
1. Press
MENU
and then
>
until
LOGIN
appears, then press
9
.
SELECT
LOGIN
appears
2. Press
9
CURRENT SYSTEM
and the
ID
of that system appears.
3. Press
>
until
AUTO LOGIN
and then press
9
to finish.
