Avaya CallPilot 600r, Техническое обслуживание и диагностика, Страница: 55 / 106

Before you begin
Important:
Take the component out of service before you run the diagnostic test. See Starting and
stopping components on page 52.
Components that have diagnostic tests available
The following table identifies the components on which you can run diagnostics.
Component Diagnostics available? Replaceable?
Media Bus No No
MPB96 board Yes Yes
Time switch No No
Multimedia channels Yes No
Channels No No
DS30X link (cable) Yes Yes
Diagnostic tests available for each component
The diagnostic tests that are available for each component are listed in the Diagnostic section
of the Maintenance screen. To view the list of diagnostic tests for a particular component, click
the component in the component tree.
If a diagnostic test fails or cannot be performed
If a warning message appears, the diagnostic test cannot be performed because a prerequisite
condition has not been met. If a diagnostic test fails, a message appears in a new browser
window (see the example on screen step
9 on page 56).
In both cases, check the Alarm Monitor to determine the reason and the appropriate action to
take.
Before you begin
Avaya CallPilot® 600r Server Maintenance and Diagnostics December 2010 55