Avaya CallPilot 600r Скачать руководство пользователя страница 34

Страница: 34 / 106

The following flags are available for the ipconfig command.

Table 9: ipconfig command extensions

Flag

Description

Displays Help information.

/all

Displays full configuration information.

/release

Releases the IP address for the specified adapter.

/renew

Renews the IP address for the specified adapter.

To run the ipconfig command from Windows

1. Click Start → Programs → Accessories → Command Prompt.

Result: The Command Prompt window appears.

2. At the Command prompt, type ipconfig <parameters>.

Example: ipconfig /all

3. Press Enter.

Result: The system runs the ipconfig utility.

4. Type Exit to exit the Command Prompt window and return to Windows.

The ping command

The ping command sends an echo request to a specified host. Use this command to verify
network connectivity to the remote device.

Ping command syntax

The ping command uses the following syntax:

ping [-t] [-a] [-n count] [-l size] [-f] [-i TTL] [-v TOS] [-r count]
[-s count] [[-j host-list] | [-k host-list]] [-w timeout]
destination-list

Table 10: ping command extensions

Parameter

Description

-t

Pings the specified host until interrupted.

Using Windows online diagnostic tools

34 Avaya CallPilot® 600r Server Maintenance and Diagnostics

December 2010

Содержание CallPilot 600r











































































































Результаты поиска

Содержание CallPilot 600r

Отзывы:

Avaya CallPilot 600r, Техническое обслуживание и диагностика, Страница: 34 / 106

Результаты поиска

Содержание CallPilot 600r

Отзывы: